MENU

General FAQ's

1. Do competitors have to sign a liability release?

Answer: Yes. Release forms will be available and must be signed at registration.

2. Implementation of Full Fall Arrest Due to the OSHA final rule effective April 1, 2015, the State Fair Lineworkers Rodeo will be requiring the mandatory use of personal fall protection for all Journeyman Team and Apprentice climbing events. Fall protection systems shall be supplied by the competitor and be used in accordance with the manufacturer’s specifications along with the use of a secondary work positioning strap or lanyard while transitioning around attachments on the pole. While using the secondary positioning strap or lanyard the competitor shall not get into a position to allow for a free fall greater than 0.6 meters (2 feet). Climbers will not be permitted to ascend or descend with both the fall arrest device and the secondary positioning lanyard around the pole. It will be a requirement for every event that the secondary positioning lanyard be disconnected and parked on a D-Ring after transitioning above or below hardware on the pole. With that being said, no climber will be allowed to work from the secondary positioning lanyard alone and must make a full transition and be in full fall arrest prior to doing any work. Judging Guidelines Judging will be based on the following: 1. The fall arrest system is being used in accordance with the manufacturer’s specifications. 2. The climber keeps the fall arrest system adjusted properly at all times. 3. The climber does not create a potential free fall greater than 0.6 meters (2 feet). 4. All cutouts will be judged the same as in the general rules (i.e. loss of control and fall to the ground) Note: All infractions will be a two point deduction with the exception to a fall to the ground which will be assessed as a ten point deduction

3. On Events with equal potential grounding, can the brackets be installed at the base of the pole while using a long ground up to the neutral?
ANSWER - YES

4. Can Jumper to the neutral on equal potential events be installed by hand?
ANSWER - YES

5. Can the handline be used to sag conductor?
ANSWER - NO

6. Are there lock nuts on the bolts in the cross arm changeout?
ANSWER - NO